foribb

Jamie and the magic torch Disk 1

2010-12-20T19:10:00.003+05:30

Jamie and the magic torch Disk 1 torrent is here:
http://www.multiupload.com/UD2N7G077C

http://thepiratebay.org/torrent/6054606

I have only 512 kbps upload speed, but will seed 24x7.

so please seed after download.

2010-12-18T15:34:00.002+05:30

Johnny Sokko and his flying robot torrent http://multiupload.com/JVG9NKSJY8

i have only 512kbps upload speed but will seed 24x7

ZTE ZXDSL 831AII modem / router firmware upgrade

2010-09-04T17:26:00.007+05:30

Warning: All Local PPPOE Settings changes to default value after upgrading, You have to reconfigure your broadband "username" and "password" and other pppoe settings after upgrade.

Here is the link for ZTE ZXDSL 831 AII firmware upgrade provided by BSNL :

http://www.box.net/shared/q0coyxd3uv

I did not noticed any major change in functioning of modem / router, only some graphical interface and viewing changes. Some menu and configuration settings changed now & can be easily accessed. After upgrade you will find all settings and configurations by typing http://192.168.1.1 hence http://192.168.1.1/home1.html dose not required any more as earlier.

I even tried it on Nokia Siemens Networks's C2110. Firmware of Nokia Siemens C2110 now changed and it is showing ZXDSL 831AII as modem. Though firmware worked on C2110 and my modem is working fine, it is not advisable to do upgrade on nokia siemens C2110 at all.

How To Port Forward in ZTE ZXDSL 831 AII / NOKIA SIEMENS C2110

2010-07-01T06:12:00.014+05:30

For Port forwarding, Two steps are required

1. Configure OS to connect with modem LAN connection with a single IP address, say 192.168.1.2.
2. Configure Modem/router for forward port of certain application, say Utorrent (Torrent client).

1. Configure OS to connect with modem/ROUTER LAN connection with single fix ip address (192.168.1.2 in this case).
This is required for port forwarding, if single fix ip address is not assigned to OS / Lan Card, Router's DHCP will assign any ip address to computer from a range of IP addresses (range of 192.168.1.2 - 192.168.1.21, DHCP may assign IP address 192.168.1.2, or 192.168.1.5 or 192.168.1.14) and every time DHCP server of ROUTER assigns different IP address, we have to change configuration settings of our ROUTER for this dynamically assigned IP address.
So we need a single Fix IP address to configure for LAN connection between System and Router
For Windows XP
A. Go to "network connection" in control pannel, right click "local area network"
B. Click "properties".

C. From list select "internet protocol (tcp/ip)",
D. Click "properties".
E. in general tab click "use the following ip address" and enter as follows
ip: 192.168.1.2
subnet mask: 255.255.255.0
gateway: 192.168.1.1
F dsn server: 192.168.1.1
G. CLICK OK

For Windows 7 Settings :
1. Click on Start button -> Then click on Control Panel -> Then click on "Network and Sharing Center"

2. On next window of Network and Sharing Center, Click on "Change adapter settings"

3. On next window, select "Local Area Connection", Right Click on It and click on "Properties"

Then we can find TCP/IP Protocol v4 and there we can set our static fix LAN IP address / Subnet Mask / Gateway / DNS Server

2. Configure Modem/ROUTER for port forwarding.
1. Now open web browser and type address in address bar
http://192.168.1.1/home1.html

2. And log in using username: admin / password: admin then click "OK"

3. click "configurration" in left side,

4. Click on "Advanced Security" Settings

5. On next Screen Click on 'Port Forwarding"

6. Click on "Add"

7. On next screen in Application Name, Pre-defined: can be selected to forward standard port of a program from like GNUtella / KazAa / FTP clients / many Games etc
Just select Application Type -> Select Application -> Enter Internal Host IP Address in "Forward to Internal Host IP Address:" (IP address configured in OS to connect MODEM / ROUTER, In this CASE 192.168.1.2 )
Then press "Apply"

8. If any other application's port is to be forwarded, First Select "User defined:"
9. Select "WAN Interface:" (This is PPPOE connection of our ISP BSNL connection is IpPppoe_0_35 and for MTNL Delhi connection IpPppoe_0_32 is to be selected.
10. In "Forward to Internal Host IP Address:" enter static single fix IP address of Computer we already configured. In this case it is 192.168.1.2
11. In "By Using the rule" select protocol (TCP or UDP or both protocol can be selected) then enter the ports numbers that we want to be forward, in our case the port number 34001 is forwarded for application Utorrent. We can forward a complete range of ports also (as 34001 to 34009)
Press "Apply"

And done, our Application Utorrent's port no 34001 is forwarded for both TCP and UDP protocol

ZTE ZXDSL 831AII configuraton in Bridge / Dialup Mode

2009-11-16T16:02:00.010+05:30

For Bridge mode configuration,
Three steps are required,
1. Configure OS to connect with modem LAN connection.
2. Configure Modem for Bridge mode.
3. Configure OS and make dialer for bridge mode.

So ...

Point no. 1. Configure OS to connect with modem LAN connection.

A. Go to "network connection" in control pannel, right click "local area network"
B. Click "properties".

C. From list select "internet protocol (tcp/ip)",
D. Click "properties".
E. in general tab click "use the following ip address" and enter as follows
ip: 192.168.1.2
subnet mask: 255.255.255.0
gateway: 192.168.1.1
F dsn server: 192.168.1.1
G. CLICK OK

Point no. 2. Configure Modem for Bridge mode.

A.
Now open web browser and type address in address bar
http://192.168.1.1 and log in using
1. usernaem: admin / password: admin
2. click ok
3. click "configure" in left side,

and now on internet connection configuration page click "ADD" if you already do not have bridge_0_35 setting in modem,
B.
1. click "internet"
2. click add

If there is already bridge_0_35 entry available directly go to
Point no.3. Configure OS and make dialer for bridge mode.

C.
after clicking ADD/EDIT in "configure atm pvc" page select these
1. VPI 0
2. VCI 35
3. SERVICE CATAGORY UBR WITHOUT PCR
4. NEXT

D.
in next page configuration connection type:
1. select "Bridging" and Encapsulation Type: "llc/snap"
2. click NEXT

E.
in configur WAN IP Settings page, Click "Next"

F. On Summary page, Press "Apply"

G. Now you can see new bridge_0_35 entry.

restart modem.

Point no 3. Configure OS and make dialer for bridge mode.

For Dialer configuration, Go to Start --> Control Panel --> Network Connection, Click Create a new connection

B.
On New Connection Wizard, Press "Next"

C..
On next screen, Network Connection Type, Select, Connect to the Internet, then press "Next"

D.
On next screen select "Set up my connection manually" then press "Next"

E.
On next screen, select "Connect using a broadband connection that require a user name and password", then press "Next"

F.
On next screen, enter ISP name, it could be anything, Say BSNL. Then press "Next"

G.
On next screen, enter user name and password provided by BSNL / ISPs then press Next.

H.
On final screen press "Finish" and you are ready to connect.

Press Connect :

Install Windows Vista / Windows 7 from USB pen drive

2009-09-09T14:32:00.001+05:30

How to create a bootable USB pen drive with Windows VISTA / Windows 7 / Windows Server 2008 installation.

Requirement :

1. Windows Vista / Windows 7 / Server 2008 installation disk / ISOs

2. Pen drive with more than 3 GB space

On my C2D 1.86GHz, 1GB DDR2 RAM , Intel 946GZIS, 500GB 7200rpm SATA computer, i tested it and found that installation is around 4 Minutes faster when using Pen drive for installation.

It can be done in two ways -

Method one:

If UBCD4Win is already installed on your pen drive. Your pen drive is made bootable already.

Simply copy all files and folders from DVD / ISOs of VISTA orWindows 7 or Windows Server 2008 to your pen drive.

Open your menu.lst file with notepad.

add these few lines in the menu.lst file

title Launch "Windows Vista Installation from USB stick"
fallback 1
find --set-root /bootmgr
chainloader /bootmgr
savedefault --wait=2

Save your menu.lst file.

Thats all, boot from pen drive and you will see extra title with name "Windows Vista Installation from USB stick"

Till now we have added in one single USB Pen drive

1. UBCD4Win 2. Hiren's DOS boot CD v 9.8 / 9.9 3. HBCD's Windows XP live 4. Windows Vista / Windows 7 / Windows Server 2008 Installation disk.

You may download my edited menu.lst file for all these 4 additions from here:

http://www.box.net/shared/3cqlg3gdmv

Creating Single Bootable DVD with Windows Vista, Windows XP and Hiren’s DOS Bootable CD V 9.8

2009-08-17T11:29:00.000+05:30

Requirements:
1. Software – Magic ISO Maker : http://www.magiciso.com/
or download with serials from here: http://www.box.net/shared/ph5jprgp1x
2. Software – Microsoft Virtual PC 2007 (or VMWARE etc) for testing purpose.
3. DVD – Windows Vista or Windows 7 (or ISO image of installation disk )
4. CD – Windows XP (or ISO image of installation disk )
5. CD – Hiren’s DOS Bootable CD v 9.8 / 9.9 (or ISO image of installation disk )

First Install Magic ISO Maker, and run it.

1. Click to File

2. Click Open and open ISO image of Windows 7 / Vista.

3. Extract all files to any folder.

4. Click Tools. Click Save Boot Image.

5. Save boot image of DVD to any folder.

Do same with Windows XP CD ISO, extract all files to any folder, and save windows XP boot image to any folder.

Open ISO image of Hiren Dos Bootable CD 9.8 / 9.9 and

6. Extract HBCD folder.

7. Open extracted HBCD folder, where you can see boot.gz (floppy image of Hiren Dos Boot CD),

8. Extract this boot.gz.

9. Now you can see boot.img file in this folder. This is actual HBCD boot image required to run all utilities.

Note: If you have CDs / DVD, click on file, click Open CD/DVD drive, and click on your CD / DVD drive to extract boot image and files in dvd / cds

This way you will have Four boot images
a) Windows Vista boot image (mayname it winvista.bif)
b) Windows XP boot image (may named it winxp.bif
c) Hiren DOS boot image (boot.img file in "HBCD/Boot" folder extracted from boot.gz file.
d) XP live (HBCD addition) boot image XP.BIN available in extracted "HBCD" folder

10. Now Restart Magic ISO Maker. Thus you will have new image file which is still non bootable.

11. Click Tools,

12. Click on Make Multi-Boot Image.

13. Now on Multi-Boot Image Editor, click Add.

14. On Add Boot Wizard, Click Boot from bootable image file and click Next.

15. Select bootable Image From Local computer, and browse boot image of WinVista, Open boot image then click Next.

16. Add Description of boot menu and assign any "hot key" and click Finish.

Do same again and this time browse boot image of WinXP, assign a Hot key, add description, click finish.

Do same again and this time browse boot image of Hiren DOS Boot CD which was extracted from boot.gz and will be available on HBCD\Boot\ folder. Add Description, assign any Hot Key

Do same again and this time browse boot image of XP Live (XP.bin) available in extracted HBCD folder, assign Hot Key and add description.
You may add Reboot, Boot from Harddisk, Boot from Floppy etc options.

You may also download my multiboot image from here : http://www.box.net/shared/3gp81ih5nk

(Just download and open it with Multi-Boot Image Editor)

17. Click Apply – Close. Now you may see three new files and change in type of image file (which is bootable now)

18. Drag and drop HBCD folder,

19. Drag and drop all files from Windows XP Installation folder.

20. Right click on SETUP.EXE file and rename it to XPSETUP.EXE.

Drag and drop all files from Windows Vista / Windows 7 installation folder and again rename SETUP.EXE to VISTASETUP.EXE or WIN7SETUP.EXE.

21. Overwrite any file or folder.

That’s all, now save this new image file by clicking File, Save.

Now you have Windows Vista / Windows XP / Hiren’s Dos Boot CD 9.8 / Windows XP live integrated on single DVD image, Burn this image on DVD. SEEEEEEEE:

Adding Hiren's DOS Bootable CD v 9.8 / 9.7 in UBCD4Win pendrive.

2009-05-21T10:46:00.000+05:30

A. If you have burnt iso image of Hiren's Dos bootable CD to any cd or DVd, just copy "HBCD" folder to your pen drive (pen drive which is already made bootable with UBCD4WIN)

otherwise open iso image with the help of any iso tool like ultraiso / winiso / isobuster / winimage or even winrar will do the job.

For ultraiso,

1. click on file and then click open,

2. select iso image of hiren dos boot cd v 9.8 / 9.7 and click open.:

3. Right click on HBCD folder and click Extract To.. :

4. On "Browse folder" Select UBCD4Win formated pen drive and click OK. :

In HBCD folder, copied in pen drive if you open, you can see a file boot.gz, it is compressed floopy image of HBCD dos menu, which we see when we boot from HBCD,:

On pen drive, there is a menu.lst file (lst extn will be seen if you have made settings in explorer's properties.)

5. Open this menu file with notepad or wordpad:

6. Browse this paragraph, copy and past just below it. thus we have two entries of this boot menu.
title Launch "The Ultimate Boot CD for Windows"
fallback 1
find --set-root /minint/setupldr.bin
chainloader /minint/setupldr.bin
savedefault --wait=2

now edit pasted menu to like this:

title Launch "Mini XP From HBCD 9.8"
fallback 1
find --set-root /HBCD/XPLOADER.BIN
chainloader /HBCD/XPLOADER.BIN
savedefault --wait=2

as seen here:

now browse this menu para select and copy and paste just below it:

title Darik's Boot and Nuke v.1.0.6
map --mem (hd0,0)//Images/dban.ima (fd0)
map --hook
chainloader (fd0)+1
rootnoverify (fd0)

now edit pasted para in this mannar:

title Hiren's Dos Boot CD v 9.8
map --mem (hd0,0)//HBCD/boot.gz (fd0)
map --hook
chainloader (fd0)+1
rootnoverify (fd0)

as seen here:

title could be anything, what ever you write here, will be displayed as a menu when we boot from pen drive, in this case our boot floopy image is in HBCD folder and its name is boot.gz

After booting from pen drive we will see menu like this (See extra Mini XP from HBCD 9.8 and Hiren's Dos Boot CD v 9.8 menu)

you can download my edited menu.lst file from here : http://www.box.net/shared/pyngi3q616

Thus we have UBCD4Win bootable pen drive with all tools of HBCD included and also another Windows XP PE from HBCD integrated.

Make Your Pen drive Bootable, Install UBCD4Win in USB Disk

2009-01-12T13:12:00.000+05:30

First of all, we need Ultimate boot cd for windows (UBCD4Win) v 3.13 or later...
It could be downloaded from ubcd4win.com http://ubcd4win.com/downloads.htm, size of this UBCD4win is 250+ MBs. It is also included in one of the recent Digit's DVD

Download and Install UBCD4Win, check integrity as shown.

After Installation Launch UBCD4Win by clicking Finish :

Click I Agree :

Next Step :
1. Do not search for Windows XP installation file, click No (it takes time to search installation file directory which we already know.
2. Select source Directory where Windows XP installation file is stored. It could be a hard disk folder or Installation CD, If you are using an Windows XP Setup CD, To speedup process, copy all flies from cd to any folder in hardisk (like i copied in XPPR folder). Select folder

Leave Output folder as it is,
3. Select Media Output : - None, no output to make bootable CD (only folders and flie of BARTPE will be created.
Select ISO Image if U want to make an ISO image to burn on CD later
Select Burn to CD/DVD if you directly want to make Bootable CD.

6. Click Agree to agree Windows XP EULA

7. When completed click Close

8. Click Plugins , Now to make Pen drive Bootable, on main window, click Plugins

9. From List of plugins, select Plugin UBCD4WintoUSB
10. Click Config to launch this Plugin

Plugin your blank pen drive, backup data of your pen ddive as it will be formated
11. Select Enable Format, Select flie system : small pendrive like 1gb or 2gb, select FAT16, for big pendireve like 4GB or 8GB or 16GB, select FAT32 file system)
Drive label:- anything you want
12. In boot options, select Grub4Dos, (I did not tried any other option, this option was by default, and later we can add in it other bootable utilitis like Hiren's Dos Bootable CD v 9.6 etc)
13. Check all File copy option

14. Click Yes to format pen drive.

After completion, your pen drive is ready to run as bootable UBCD4Win disk

In newer computer, when you will connect pen drive and start computer, the usb disk will be recognised. You have to set boot option as "boot from USB first" at your BIOS.

Installing ZTE ZXDSL 831AII through USB Modem in Windows Vista / Windows 7

2008-10-10T12:39:00.005+05:30

If u want to download only USB LAN Driver, you can download from here
http://rapidshare.com/files/152593074/ZTE_ZXDSL_831AII_USB_LAN_Driver.rar.html (only 57KB)
or
http://www.box.net/shared/6gcuqayte3

or

If you have usb driver for ZXDSL831AII, you can see one folder name "LAN DRIVER" in USB Driver>Drivers. Open this folder, you can see a file name "glauiad.in_" . Just rename this file as "glauiad.inf" like this

to

now connect power supply to modem, connect usb cable to modem and then this usb cable to spare USB connector of your computer. Windows will detect hardware and a Found new Hardware wizard will open.

For Windows Vista Installation:

1. select locate and install driver software :---

2. On next screeen, select Don't search online : ---

3. On next screen click brows my computer for driver software (advanced):---

4. Now brows the folder where you have changed extension from .in_ to .inf, and click Next:---
5. On next screen windows will install driver software for USB modem:---

6. While windows security warning popup will come, select install this driver software anyway:--

7. Installed hardware will be listed as USB IAD LAN Modem:-
If you want to Uninstall usb modem driver, go to control panel, device manager, and click on network adoptor, right clikc on USB IAD Lan Modem, and click Uninstall:---

For Windows 7 Installation:

1. Switch on modem, Connect Modem through USB port, then Go to Control Panel, Click "System and Security" Then click "System". On "System" Click Device Manager"
2. In "Device Manager" go to "Other Devices". Right Click on "Unknown Device". and click "Update Driver Software"

3. Now on Update Driver Software - Click "Browse my Computer for Driver Software"

4. Browse the downloaded and extracted driver folder.

5. Click "Next"

6. Now Click "Install This Driver Software anyway"

7. Click "Close", Router / Modem is installed and ready to use

CONFIGURING ZTE ZXDSL 831AII IN PPPOE MODE

2008-05-26T10:20:00.000+05:30

For always on mode
A.
1. go to "network connection" in control pannel, right click "local area network"
2. click "properties".

1. from list select "internet protocol (tcp/ip)",
2. click "properties".
3. in general tab click "use the following ip address" and enter as follows
ip: 192.168.1.2
subnet mask: 255.255.255.0
gateway: 192.168.1.1
4 dsn server: 192.168.1.1
5. CLICK OK

B.
Now open web browser and type address in address bar
http://192.168.1.1 and log in using
1. usernaem: admin / password: admin
2. click ok
3. click "configure" in left side,

and now on internet connection configuration page click "ADD" if you already do not have pppoe_0_35 setting in modem,
1. click "internet"
2. click add

IF U ALREADY HAVE pppoe_0_35 entry as shown here, do not click add, click edit (pencil)

if there is already a listing of pppoe_0_35 then click corrosponding EDIT butten or click ADD.

C.
after clicking ADD/EDIT in "configure atm pvc" page select these
1. VPI 0
2. VCI 35
3. SERVICE CATAGORY UBR WITHOUT PCR
4. NEXT

D.
in next page configuration connection type:
1. select "ppp over ethernet" and Encapsulation Type: "llc/snap"
2. click NEXT

E.
in configur WAN IP Address settings page select
1. click obtain an IP address automatically
2. click Enable NAT
3. click Add default Route
4. click NEXT

F.
configure Broadband username and password page
1. select service name (anything)
2. usernaem (username provided by bsnl without @bsnl.in, or @dataone.in etc
3. Password (provided by bsnl)
4. reenter password
5. select always on
6. click NEXT

G.
in next Summary page
1. CLICK APPLY, and you are done.........

restart modem, to restart, click system, click reset and restart, click restart (without reset selection).

H.
u will get page like this
1. click connect
on next page with user / pass
2. click connect

status can be seen after connection
1. click status
2. click internet connection

USB DRIVER, MANUAL, DIALER FOR ZTE ZXDSL831AII MODEM

2008-05-26T06:31:00.001+05:30

The USB modem setup files will work on Windows XP /2000,
To install Modem in Windows Vista / Windows 7 Please see this link:

http://foribb.blogspot.com/2008/10/installing-zte-zxdsl-831aii-through-usb.html

I have original ZTE ZXDSL driver CD. From which i uploaded this. if anyone has problem with rapidshare, infrom me and provide preferred file hosting service.

download from here :
http://www.box.net/shared/2gzu22jqbq

filefactory mirror:
http://www.filefactory.com/file/7cc26d

megashare mirror:
http://www.MegaShare.com/389861

rapidshare mirror:
http://rapidshare.com/files/104430519/ZTE_ZXDSL831AII_USB_DRIVER.rar

opendns servers settings in bridge mode

2008-05-25T08:49:00.000+05:30

well if anyone is using bridge mode (dialup like) to connect internt at home, opendns or other custom dns can be used without going in modem configuration pages.

how?

1. go to control panel, go to network connection then right click your broadband dialup icon.

2. In broadband connection properties go to networking tab, then click internet protocol, and click properties

3. check use the following dns servers, and then enter custom/open dns servers.

then reboot your system.

it will work with all broadband bridge connections. SEE THIS

before:

after:

scheduling download for Night Unlimited Time

2008-05-25T08:30:00.000+05:30

For NU users, i think bridge mode is a good option, using bridge mode you can easily connect or disconnect from dataone, and for Unlimited plans Always on method is good, as whenever you switch on modem you get connected, (NEED NOT TO WORRY OF EXCESS DATA DOWNLOADED).

for Night unlimited users.....you can use (as a sugession) these programs and setting to download within 02:00 to 08:00 daily.

1. auto power-on & shutdown from hxxp://rapidshare.com/files/81556762/scheduling_1.rar (cracked) from http://www.lifsoft.com/ another link : http://www.box.net/shared/9fuyu7rt94
2. cidial v 2.3 (freeware)or Version 3.1 cracked : http://www.box.net/shared/9idjpfdz4r
3. any good download manager like free download manager, internet download manager, or internet download accelerator.

first connect internet in day time, and note down the connect time, then disconnect and note down the time accurately with seconds,

in night check your data usage (for new users) at data.bsnl.in using portal id and login password and note down the difference between your login in morning to which is listed in website, same do with dissconect time between yours and bsnl's listed time. For my case the difference is 00:43 second

auto power on & shutdown: use this and configure it for different tasks
a) start your computer at 02:00 am from hibernate mode
b) at 02:02 select "RUN PROGRAM" to start download manager,
c) at 02:03am select RUN PROGRAM and choose cidial.exe, which will help you to stay connected in bridge mode
d) at 02:04am select your internet softwares like torrent client to run

e) at 07:55am select "close program" and select cidial.exe

you can select other program to close in between,

f) at 07:58am select Hibernate.

cidial:
a) open cidial.exe or sinply install it. start program, click file, clikc settings.
b) choose broadband connection and enter user : password for broadband, select autoreconnect, shrink when done, etc. Press ok

cidial is used to eleminate problem to manually reconnect in case of internet disconnect night UL time.

access HOME PC USING TEAMVIEWER

2008-05-25T08:08:00.000+05:30

procedure with TEAM VIEWER

download and install team viewer, open team viewer.

then click option

enter your unique password. then click proxy settings (required if you are behind a router or proxy in office.

select this if you do not know what is proxy : port to access internet

if you know the proxy details enter here like:-

after this the team viewer is able to connect its server, and it will provide an id like this

install same software in home, give access it through firewall for internet. it will again provide another ID for home PC.

now if you have an ID for office say 123 456 789

and for home the Id is say 321 654 987. and u want to connect from office. enter id for home and connect. from home if u want to connect your office enter id for office and connect, after connection establishment, enter password.

access home pc using LOGME IN

2008-05-25T07:39:00.000+05:30

with LOGMEIN.

go to site https://secure.logmein.com/products/free/register.asp
and create an personal account. Login in your account. click Add Computer.

select Logmein free sercvice and click continue.

now download logmiin installer and install it.

while asked, enter password to access computer and continue.

this is the pass, which will require while connecting this computer from remote side.

now this computer is added to be remotely controlled.

from anywhere in world if you enter in your account, this computer will be displayed in account page. like this.

Click this computer, enter password code to access pc.

in next page, select REMOTE CONTROL OPTION

CLICK REMOTE CONTROL.

if u want to access another PC, use same installer to install logmein, on that computer.